Correctly sized, an air source heat pump can heat a Perthshire home comfortably right through a hard frost. Modern units extract warmth from outdoor air well below freezing. The keys are a proper heat loss calculation, suitable radiators and sensible insulation, so the system runs steadily at lower flow temperatures rather than working flat out.
Last updated:
Perthshire ranges from Georgian and Victorian stone houses in Perth to cottages, farmhouses and modern estates around Crieff, Auchterarder, Blairgowrie, Aberfeldy and Pitlochry. Many rural properties are off the gas network and rely on oil, LPG or electric heating, which makes a heat pump especially relevant. Solid stone walls and older windows raise heat loss, so we assess insulation alongside the heat pump itself.
In Scotland, many air source heat pump installations fall within permitted development, subject to conditions on size, position and distance from boundaries. Listed buildings, and some locations in Perth and Kinross Council conservation areas, may need consent. Modern units run quietly, but we still site them away from neighbours' windows, on a solid base, with clear airflow and room for maintenance.
Perthshire winters can be properly cold, with glens and valley floors holding frost and occasional snow. Heat pumps keep working in these conditions, running periodic defrost cycles to clear ice from the outdoor coil. Efficiency dips on the coldest days, which is allowed for in the design. Raising the unit slightly off the ground keeps it clear of lying snow.
Our survey covers room-by-room heat loss, existing radiators and pipework, hot water needs and the outdoor unit position. We explain whether any radiators need upsizing and where a hot water cylinder would go. You then receive a written, no-obligation quote. We install through MCS-certified partners. Interest-free credit up to £30,000, subject to status. Call 0141 230 0198 to book.
Not always. Heat pumps run cooler than oil or gas boilers, so some rooms may need larger radiators or better emitters to stay comfortable. Our heat loss survey identifies which ones, and many existing radiators can often stay.
Modern units produce a low hum, similar to a fridge at a distance. We choose a position away from bedrooms and neighbouring windows and mount the unit on anti-vibration feet to keep sound to a minimum.
Many installations are permitted development and need no application. Listed buildings, and some homes in conservation areas or where the unit would be close to a boundary, may need consent. We check your property before finalising the design.
Call 0141 230 0198 or request a written, no-obligation quote. Interest-free credit up to £30,000, subject to status.